Fire Pump Bristol

End Suction Fire Pump

Bristol end suction, split case, vertical inline , and vertical turbine are designed according to NFPA 20 for fire fighting applications. Some range are with UL/ FM certificate, This pump is designed with latest technology and has premium components for fast maintenance and absolute efficiency.

bristol end suction fire pump

Performance

  • Capacity: From 50 GPM up to 1000 GPM
  • From 40 MTR up to 160 MTR

Features

  • Available in electric motor driven or engine driven configuration
  • Dynamic balanced impellers
  • Available in clockwise or counter-clockwise rotation to simplify pump
  • room layout
  • UL Certificate No. : Ex16459

Material Construction

  • Shaft : Stainless Steel
  • Casing : Ductile Iron
  • Impeller : Bronze
  • Shaft Seal : Packing Gland-Immersion Graphite

Horizontal Split Case Fire Pump

Bristol Split Case Pump is a single stage, non-self-priming, centrifugal volute pump with radial suction and discharge port. This pump has a horizontal pump shaft with the impeller placed in the middle of the shaft and with self contained combination bearing housing and seal chamber on both sides of the impeller.

bristol horizontal split case fire pump

Performance

  • Capacity: From 300 GPM up to 1500 GPM
  • From 50 MTR up to 150 MTR
  • Features
  • In line Pump
  • Double Suction
  • Low NPSH
  • Low axial load on the shaft
  • Double Volute
  • Improved efficiency (Overall higher efficiency)
  • Low radial load on the shaft
  • Low axial and radial loads extends wear ring, seal and bearing life, minimize vibration and provides quit operation
  • Easy service bearing and packing gland can be changed without removing the top casing half
  • UL Certificate No. EX16089

Material Construction

  • Shaft : Stainless Steel
  • Casing : Ductile Iron
  • Impeller : Bronze
  • Shaft Seal : Packing Gland D -Immersion Graphite

Vertical Turbine

bristol vertical turbine pump

Performance

  • Capacity: From 500 GPM up to 5000 GPM
  • Head: From 50 MTR up to 200 MTR

Features

  • Performance and hydrostatic tests
  • In compliance with NFPA 20, FM approved
  • Materials of construction: cast iron, bronze fitted
  • Sealing arrangement: packing with flushing
  • Modular construction: assures complete flexibility in selecting a pump
  • Pre-engineered standard components
  • Space-saver design: requires minimum floor space
  • Static suction lift: permissible by NFPA 20 where water source is located below ground
  • Open line shaft: water-lubricated bowl and line-shaft bearings
  • Stuffing Box (Gland) - (Bronze) - to press the packing gland into the seal area through bolts
  • Bolted bowl: bowls and suction bell are bolted together, allowing easier disassembly
  • Dynamic balanced impellers: secured to the shaft with steel locking collets
  • Discharge gauge connection

Material Construction

  • Shaft: Stainless Steel
  • Casing: Ductile Iron
  • Impeller: Bronze

Typical Services

  • Cooling Water
  • Seawater and River Water Intake
  • Industrial Process Pump
  • Utility Circulating Water
  • Condenser Circulating Water Pumps
  • Fire Service
  • Reclaimed Water